Squander Tire Recycling Crumb Rubber PowEPTPlant EPTry
Waste Tyre recycling EPT for sale
one. Strength Saving
two. More than twenty year’s knowledge
three. No air pollution and environment pleasant
four. CE, ISO9001, SGS.
Large Profit Waste Tire Recycling crumb Rubber Plant EPTry for sale
Quick introduction of tire crusher/waste tire recycling EPT
Tyre recycling EPT rubber powEPTEPT is used for recycling the scrap tires,
either nylon tires or radial tires from 650-1200mm diameter.
The bead ring can also be separated from the tires and sold to the industry
and make income.
It is a higher revenue undertaking and provides you a whole lot EPT.
Far more EPTant,It is EPTfriendly for the duration of processing.
Operating process of tire crusher/waste tire recycling EPT
Squander tires–Tire ring cutter–Tire shredder(Or tire strip cutter–Tire slicer EPT)
–Metal wire separator–Vibrating monitor–Magnetic separator–Belt conveyor–
Rubber powEPTMill crusher
Distinct functions of each tire crusher/tire crushing EPT/tyre cutter
A.Tire ring cutter
Tire ring cutter is a EPT gear to cut and separate the steel mouth,
sidewall and tread cap of the scrap tyres.
It is the 1st stage of processing scrap tires.
| EPT | Blades rotary speed | Voltage | Capacity | Weight | Dimension |
| 3Kw | 15r/min | 380V/50Hz | thirty pcs/hour | 500kg | one.6*.9*one.5M |
B.Tyre shredder
It right reduce the tread cap into the modest blocks.Brings together the features oftire strip cutter and rubber block cutter
The conveyor helps to straightforward have the tread cap on to the EPT.Preserving labor
and time.
| Voltage | EPT | Potential | Output dimension | Fat | Dimension |
| 380V/50Hz | 30*2Kw | 1000kg/hour | 35*35mm | 5.8T | three.five*two.1*2.4m |
C.Tire strip cutter
(1).Additional lower the tire tread and sidewall into strips, strip width is altered. Tire circle mouth is retained.
(2).Two chopping discs making use of a EPT metal heat treatment, challenging and sturdy, and can be repeated grinding use.
| Voltage | EPT | Strip width | Capacity | Bodyweight | Dimension |
| 380V/50hz | 4Kw | 25-55mm | 20 strips/hour | 900kg | 1.four*.8*1.55M |
D.Tire slicer cutter
| Voltage | EPT | Potential | Output dimensions | Bodyweight | Dimension |
| 380V/50Hz | seven.5Kw | 1000kg/hour | three-5cm | 550Kg | one.1*.nine*one.15M |
E.Metal wire separator
(one).The EPT is largely employed for separating the rubber on the tyre circle mouth from bead ring,resulting in a total bead ring.
(2).Our EPT is straightforward procedure, effortless upkeep,large separation efficiency, clean.
| Voltage | EPT | Blades rotary pace | Capacity | Weight | Dimension |
| 380V/50hz | 11Kw | 18r/min | 65pcs/hour | 1.5T | one.5*.nine*one.3m |
F.Rubber powEPTmill crusher
(one). Large-duty bearings, massive inertial wheel and powerful crushing capacity
(2). Straightforward-disassembly design, simple and straightforward to cleanse and sustain
(three). Two-layer audio-insulated hopper to insulate sound
(4). High-velocity quality cutter, sharp edge, resilient in operation
(5). Interlock EPT protection to make certain operational safety.
(6). TigEPT construction, little space and easy approach circulation.
(7). Low strength-consuming and good overall performance-value ratio.
(8). All electrical connections are safe:brief circuit is not possible by any means
Application of the tire powEPT
(one). EPT reclaimed rubber, as an alternative of partial all-natural rubber
(2). Shade elastic ground tile.
(3). Manufacture waterproofing materialswaterproofing paint water-resistant
and sealed material, and many others.
(four). Create highway substance.
(5). Used for modified asphalt.
(six). Utilised for modified plastics.
(seven). Used to construct plastic sporting activities venues runway artificial turf.
(eight). Used for oilfield plugging solid wall.
(nine). Utilized in manufacturing rubber soles.
EPT pictures:
