Automated tire recycling EPT/tyre shredEPTEPT

Tire debeader

The very first action in tire recycling procession
Weighty duty human body
Hooks and cross pulling die produced of 45# metal, tempered and quenched
Equipped with security body avoiding the hazards in the course of doing work
Two sequence: Hydraulic a single and mechanic 1
Effortless to run and adjust spare components (hooks and cross pulling die)
Tire cutter

Reducing tires into parts ahead of shredding
Modest tire items are simpler to process in shredder
Knives made of YG-20 steel, EPT using time
Hydraulic management
1 clamping cylinEPTand one chopping cylinder
Equipped with a roller platform to procedure big tires
Tire shredder

The higher-potential shredEPTwas EPTly deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed for direct size reduction of tires into cleanly minimize tire chips, size 50×50 mm. Slicing shafts for the generation of more substantial tire chips are obtainable higher torque at minimal velocity cut even the strongest tires into items.
All building attributes are created for continuous operation in orEPTto achieve maximum throughput costs at least expensive fees.
Extremely exact tolerances between the reducing knives generate cleanly reduce tire chips at minimal strength consumption.
The reducing knives created of high top quality alloy steel can be re-sharpened and reused which will increase the provider existence and minimizes the running expenses.
The complete reducing chamber is lined with tough put on plates.
Big doors allow for simple entry into the reducing chamber.
Tire cracker

The shear in between the two rollers will make tire chips into powders as properly loosen rubbers, steels and textiles
Roller physique created of solid steel
Floor of roller manufactured of alloy metal, welded when worn out
1 flat area roller and one particular teethed roller, higher throughput of powders
Bottom produced of solid iron
Crisis quit when overload
Length between the two rollers can be adjusted.
Challenging gear EPT
Outfitted with screening EPT, magnetic separator and fiber separator, 99% purified rubbers will be received.
Finals: 8-thirty mesh
Magnetic separator

Final Merchandise(five-one hundred twenty mesh tyre powder), As photograph:
The identical time, Tyre powEPTis widely use in numerous market. It can make rubber tile, reclaimed rubber, car element Ect other individuals.

2-Reclaimed rubber Creating Line From Tyre Powder:

1. Dynamic desulfurization tank (one sets

Solution Name
Dynamic desulfurization tank
Model specifications

two. Open up miXiHu (West Lake) Dis.ng mill (you require 2-three sets)

1. Diameter of roller: 450mm

two. Doing work size of roller: 1200mm

3. Pace of entrance roller: 24.26m/min

4. Friction ration of two rollers: 1: 1.27

five. Max gap: 15mm

six. Ability: twenty five-50kgs

seven. Wieght: 2000kgs

eight. Motor EPT: 55KW

nine. Dimension: 6150*2280*2000mm

three. Rubber refiner( one sets)

one. Entrance rolle diameter: 480mm (drum )

2. Rear roller diameter: 612mm (drum)

3. Doing work duration of roller: 800 mm

4. Entrance roller linear speed: 22.97m/min

5. Pace ratio of two rollers(front/rear): one: 1.eighty two

six. MAX Gap: 15mm

7. Motor EPT: 55KW

8. Dimension: 4700*2100*1480mm

Last EPT(RECLAIMED EPT):

No	Identify	design	amount	EPT
EPT tire pre-processing , you will get lt 50*50MM rubber crumb
one	Single hook debeader	LS-1200	1	eleven KW
2	EPT tyre cutter	WTC-120	one	5.five KW
3/4	EPT tyre shredder( with EPT tyre conveyor)	ZPS900	one	sixty one.5 KW
Rubber powder processing: you will get three-eight MM rubber powder,at the exact same time, separate the fiber and steel wire
5	Tyre crusher	XK560	one	75 KW
6	Big conveyor gear	BCL-8	two	2 KW
7	Modest conveyor tools	BCL-three	one	1.1 KW
eight	Big Magnet separator	BMS22	one	2.2 KW
nine	Modest Magnet separator	SMS-1	1	1.1 KW
ten	Huge Shaking display	BSS-8	1	7.5 KW
eleven	Little Shaking monitor	SSS-3	one	3 KW
12	Fiber separator	FS110	one	11 KW
thirteen	Good grinder	XMF420	one	32.4 kw
fourteen	Circle shaking screen	DIA600	1	2.2 kw