rubber granulator crusher rubber granulate grinder
The EPT tire recycling EPT will be managed by the PLC, all the materials will be procedure within of EPTs, there is Real ZERO Pollution. one labor, 1 engineer can run all the EPTs, no need to have to operate the EPTs, just control the PLC. the EPTs can shield the EPTs, function the EPTs and hold the EPTs operate smoothly.
Specification
1.Tire shredEPTEPT
The Rubber ShredEPTEPT adopt PLC automated manage technique, with automatic reversal manage system in overload situation. Two-shaft tire crusher is EPTly developed for aged tires with lower speed and substantial torque to minimize sounds and EPT consumption.
The blade of the shredEPTis created of higher high quality steel and subjected to Bodycote heat remedy to achieve the very best crushing functionality.The shredEPTis effortless to disassemble and modify cutter blade and suited for tearing huge, further thick and challenging materials.The thickness range of the crushing blade is 25mm-152mm in accordance to the tire sort,output and last product. The grinEPTcan process OTR tires,huge truck tires,auto tires and so on at the speed of one-30tons whithin 1 hour.
| Product | Input dimension | Output measurement | Cappacity | Motor | Blades quantity | Proportions | Weight |
| TS-800 | 800mm | fifty*50mm | 1-2T/h | two*22kw | 16pcs | four*2.six*three.2m | 8T |
| TS-1200 | 1200mm | 60*60mm | 3-5T/h | 2*37kw | 20pcs | four.8*two.eight*3.5m | 14T |
| TS-1600 | 1600mm | fifty-150mm | 6-8T/h | two*45kw | 16-30pcs | five*two*three.4m | 18T |
| TS-1800 | 1800mm | fifty-150mm | seven-10T/h | two*55kw | twenty-24pcs | 5.six*2*3.4m | 23T |
| TS-2000 | 2000mm | seventy five-200mm | ten-15T/h | 2*75kw | 20-30pcs | six*2.four*4m | 36T |
| TS-2400 | 2400mm | a hundred-200mm | twenty-30T/h | two*110kw | 16-24pcs | 7.four*three.two*five.2m | 56T |
two.Rasper
EPT tire shredding method is designed to generate up to six tons for every hour of wire cost-free rubber mulch.This technique generates up to a ninety nine% wire cost-free chip ranging in dimension in between 12-25mm dependent on the preferred dimensions.Following processing,the steel is taken off by our magnetic separation system.At this level,the wire free of charge rubber chips are all set to be coloured and utilized for landscaping mulch and the metal is ready to be baled and sold to smelters.
| Rasper | Motor | EPT | Capacity | Proportions | Excess weight | Cutting chamber | Ultimate item |
| R45 | Siemens | 45KW | three hundred-500kg/H | one.4*one.two*two.3m | 1700kg | 450*600mm | 10-30mm |
| R55 | Siemens | 55KW | 500-700kg/H | 1.7*1.7*2.3m | 1850kg | 450*800mm | 10-30mm |
| R75 | Siemens | 75KW | seven-hundred-1T/H | 2*two*4.1m | 3500kg | 550*800mm | 10-30mm |
| R90 | Siemens | 90KW | one-1.5T/H | two.one*two.1*four.1m | 4200kg | 550*1000mm | ten-30mm |
| R132 | Siemens | 132KW | 1.five-3T/H | two*two.five*four.1m | 6100kg | 742*1200mm | 10-30mm |
| R315 | Siemens | 315KW | 3-6T/H | 6.2*two.one*3.6m | 12400kg | 697*1562mm | 10-30mm |
three.Granulator EPT
Waste Tire Recycling Rubber Granule Producing EPT is adopting actual physical recycling technique and is made to grind the rubber mulch from the rasper into tiny granules as fantastic as one-6mm. The granules are screened and re-circulated until finally the wanted measurement is attained. This Entirely-Automatic Tyre Recycling Line working in standard temperature, no want to incorporate any other chemical substances, no pollution to the atmosphere. This is the best way to recycling scrap tires.
| Granulator | G37 | G45 | G90 |
| Motor | Siemens | Siemens | Siemens |
| EPT | 37kw | 45kw | 90kw |
| Capability | 300-500kg/h | five hundred-800kg/h | 800-1500kg/h |
| Dimensions | one.eight*1.six*two.4m | one.8*1.nine*two.4m | 2.2*two.3*3m |
| Final merchandise | one-6mm | 1-6mm | one-6mm |
4.Miller
Rubber powEPTis the last consequence of ambient tire recycling.At this phase,crumb rubber is ground down into a thoroughly clean powEPTform with nearly all metal and fiber taken out.Rubber powEPThas numerous secondary employs from injection molding goods,coatings,roofing resources and a variety of asphaltapplications.
Rubber powEPTis normally found in forty-seventy four microns(.40-.74mm) in size.This micron dimension metarial has the edge of becoming incorporated into new or eXiHu (West Lake) Dis.sting formulations for various polymers and completed merchandise.
| Rubber powder | M2000 | M1500 | M1000 | M500 |
| Enter item | Weighty obligation truck tyres to bicycle tyres | |||
| Enter measurement | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm |
| Output size | shred to thirty-a hundred and twenty mesh rubber powder | |||
| Ability | 2000kg/h | 1500kg/h | 1000kg/h | 500kg/h |
| Overall Kw | 680-760kw | 516-556kw | 347-372kw | a hundred and seventy-190kw |
Mob 151366 0571 six
FAQ:
Q1,Are you a manufacturing unit or a investing company?
A. We are a manufacturer with 30 a long time production knowledge in tire recycling EPT. We have export license, we can offer you the factory costs.
Q2. Can you assure the capability as you pointed out ?
A. Absolutely of course,besides that,we also provide 3-5years warranty.
Q3, are you sure the final rubber powEPTcan be completely clean out of wire metal or nylon ?
A. The final powEPTpurity can attain ninety nine.nine%. we have magnetic separator which can independent the wire metal from the rubber powder.
